OTK Skive Ø6,3 x 12,5 x 1mm

The washer can be used for the following parts on a standard OTK chassis:

- Mounting the Ø180x13mm brake disc to the hub (3 no. required), together with 3 no. M6 x 25mm sockt head cap screws (part no. V.TCE6X25) and 3 no. M6 heat resistant nuts (part no. D.M6C) 

- Mounting the nassau panel to the M7 nassau support brackets (upper and lower). 5 no. washers are required to mount the nassau, together with: 5 no. M6 high profile nylock nuts (part no. D.M6A.A); 5 no. red rubber washers 6x20mm (part no. 0031.00); 3 no. aluminium Ø6mm countersunk washers (part no. 0033.00); 2 no. M6 x 20mm countersunk bolts (part no. V.TPSCEI6X20); 1 no. M6 x 25mm countersunk bolts (part no. V.TPSCEI6X25); 2 no. M6 x 20mm socket head cap screws (part no. V.TCE6X20)

- Mounting the M6/M10 upper and lower front crash bars to the chassis (4 no. washers required) together with: 2 no. M6 x 20mm countersunk bolts (part no. V.TPSCEI6X20); 2 no. M6 x 30mm button head bolts (part no. V.TB6X30); 4 no. M6 standard nylock nuts (part no. D.M6A.B); 2 no. countersunk aluminium washers (part no. 0033.00)

- Mounting the side crash bars to the chassis (2 no. required), togehter with: 2 no. M6 standard nylock nuts (part no. D.M6A.B); 2 no. M6 x 35mm socket head cap screws (part no. V.TCE6X35) 

- Mounting the angled steering column hub to the steering column (1 no. washer required)

- Mounting the lower seat supports to the chassis (4 no. washers required) together with: 4 no. M6 x 45mm socket head cap screws (part no. V.TCE6X45); 4 no. M6 high profile nylock nuts (part no. D.M6A.A)

- Mounting the BSD Master Cylinder to the chassis (2 no. washers required) together with: 2 no. M6 x 55mm socket head cap screws (part no. V.TCE6X55); 2 no. M6 high profile nylock nuts (part no. D.M6A.A)